Specialty Guitars Garage Sale

Items for sale on this page may be used or new. Used items are in very good condition, and fully described. They may be shop-worn or cosmetically imperfect. New items are generally clearance items. As New items have had their original packaging opened, but haven't actually been installed.


No returns, exchanges or refunds on Garage Sale items.

Planet Waves Classic Soft Garment Leather Guitar Strap, Black

2.5" wide soft garment leather guitar strap with suede backing, stitched. Adjustable from 44.5 to 53" long.
Mfr. Part No. 25SL00-DX (Black)

Condition: New

Regular Price: $41.95
Garage Sale Price: $23.10
You Save: 45%

 

Quantity:  

Planet Waves Classic Leather Guitar Strap

2.5" wide classic style leather guitar strap, unstitched. Adjustable from 44.5" to 53" long.
Mfr. Part No. 25L01-DX (Brown) / 25L00-DX (Black)

Condition: New

Regular Price: $17.50
Garage Sale Price: $9.65
You Save: 45%


Brown
Black

Quantity:  

Planet Waves Suede Guitar Strap

2 1/2" wide superior quality suede strap. Fully adjustable for length from 44.5" to 53".
Mfr. Part No. 25SS00-DX (Black) / 25SS01-DX (Cognac) / 25SS02-DX (Honey)

Condition: New

Regular Price: $34.75
Garage Sale Price: $19.10
You Save: 45%


Black
Cognac
Honey

Quantity:  

Seymour Duncan Alnico II Pro Slash APH-2n, Neck, Zebra

Like the standard APH-1 Alnico II Pro, this pickup uses an Alnico 2 magnet. However, the Slash model is wound with just enough boosted output to push a stock Les Paul toward the sweet sustain and rude crunch that characterizes Slash's sound as heard on hundreds of tracks. In addition, it comes with some of the same appointments found on the Seymour Duncan pickups in Slash's '86 recording axe, including single-conductor cable, long-legged bottom plate, and wooden spacer. For the true fan, or the player who wants to capture Slash's recorded tone, this pickup is a critical part of the tone chain. This is same pickup found in the newest Gibson® Slash model Les Paul.

Condition: New

Regular Price: $135.00
Garage Sale Price: $94.95
You Save: 30%

 

Quantity:  

Weber Vintage Series 12A100 12" Speaker, 8 Ohm

For early 50's tweed Deluxe, replaces Chicago Jensen P12R, other early/mid 50's straight cone AlNiCo 12's. 12", 7oz AlNiCo plug magnet, 15 watt, 1" voice coil, straight cone.
Warm, crunchy, early breakup, compressed at high volume, straight simple cone similar to the early 50's Chicago Jensen P12R.
This product has a $25.00 heavy item shipping surcharge

Condition: New in Box

Garage Sale Price: $100.00

Sorry, we are currently sold out of 'Weber Vintage Series 12A100 12" Speaker, 8 Ohm'. Please check back later.

SOLD

TonePros Locking Posts, Black

For use with stop tailpieces, wraparound-style bridge/tailpieces or vintage-style non-adjustable bridge/tailpieces. Use your existing stop tailpiece or the stop tailpiece of your choice, including those shown above. American thread 5/16-24. Set of 2, with bushings, inserts and locking wrench.
Available in black only.

Condition: New

Garage Sale Price: $43.45

 

Quantity:  

KGC Killer Guitar Components Brass Mega-Stop Tremolo Stopper

Milled from solid brass, the KGC tremolo stopper offers more mass for added vibration transfer directly to the body. It has a nylon screw insert that holds the set screw in place without the need for nuts to lock it in.Stainless steel adjustment screw.

  • Solid-milled Mega Mass design for added resonance, sustain, tone and stability
  • Allows for exact return to zero every time
  • Mirror-polished top side
  • All necessary hardware included
  • Condition: New

    Garage Sale Price: $34.95

    3 available

    Quantity:  

KGC Killer Guitar Components Brass Tremolo Claw

The Killer Guitar Components Brass Trem Claw includes a solder-free heat-shrink lug on the claw, allowing you to simply put the wire into the connector, crimp it, and shrink the tubing with a lighter or heat gun.The 1-3/8" mounting hole spacing fits almost every tremolo with just a few exceptions. Directly replaces any standard aftermarket claw such as Gotoh®, Wilkinson®, etc.Includes two 1-1/2" long brass mounting screws and 2 1-3/4" stainless screws for setups where a longer screw is needed.

Condition: New

Garage Sale Price: $44.95

3 available

Quantity:  

KGC Killer Guitar Components Brass Tremolo Claw, Compensated

The Killer Guitar Components Brass Trem Claw includes a solder-free heat-shrink lug on the claw, allowing you to simply put the wire into the connector, crimp it, and shrink the tubing with a lighter or heat gun.The 1-3/8" mounting hole spacing fits almost every tremolo with just a few exceptions. Directly replaces any standard aftermarket claw such as Gotoh®, Wilkinson®, etc.Includes two 1-1/2" long brass mounting screws and 2 1-3/4" stainless screws for setups where a longer screw is needed.

10 degree angled fingers for pre-compensated tension adjustment provides equal tension pulling from each side of your bridge when using the whammy bar.

Condition: New

Garage Sale Price: $54.95

2 available

Quantity:  

KGC Killer Guitar Components Vintage Brass Saddles

These vintage brass saddles from KGC are machined from solid brass, not bent or cast like most brass saddles.

Stainless steel height adjustment screws. Fits 2-7/32" E to E spaced tremolo bridges. Saddles are .441" or 11.2mm each

Allen wrench included.

Condition: New

Regular Price: $74.95
Garage Sale Price: $64.95
You Save: 13%

1 available

Quantity:  

Killer Guitar Components Aluminum American Standard Tremolo Block

Precision-machined in the USA from aircraft-grade aluminum, this tremolo block fits American Standard Strats® with 2-1/16" E to E string spacing and 2 point pivot bridges. This super lightweight block is ideal for the player looking for additional brightness and musical bite. The block is designed to be a direct replacement for your American Standard-style tremolo block, and installs with no modifications to your guitar. Detailed installation instructions are included.

Uses vintage Fender®-style 10-32 threaded tremolo arm.
Mfr. Part #KGC-MA. Made in the USA.

  • Machined from Aircraft Grade Aluminum
  • Rich tone, brighter than brass with excellent note separation
  • Mounting holes are tapped extra deep for added stability
  • Extra-long stainless steel screws provided with your block
  • Bottom face polished to a mirror finish - show it off by removing your back plate
  • Manufactured with KGC's proprietary "Flop Stop"

THIS BLOCK FITS:

American Standard Stratocaster
Strat Plus Deluxe
Any American Standard Style 2 Post Bridge

SPECS:
Width2.95 in (74.9mm)
Height1.65 in (42mm)
Thickness0.50 in (12.7mm)
Weight3.5 ounces

Regular Price: $89.95
Garage Sale Price: $75.00
You Save: 17%

 

Quantity:  

Killer Guitar Components Aluminum Mexican Standard Tremolo Block

KGC's Mexican Standard aluminum tremolo block fits Stratocasters® with 2-1/16" E to E string spacing and 6 screw pivot bridges. Precision-engineered in the USA, this block is a direct drop-in replacement for your existing trem block. This lightweight trem block increases the sustain and stability of your guitar, while enhancing its brightness and chime. Milled from airplane-grade aluminum, this block provides musical bite and excellent note separation. Installation is simple, with no modifications necessary. Detailed instructions are included.

Uses vintage Fender®-style 10-32 threaded tremolo arm.
Mfr. Part #KGC-MA. Made in USA.

  • Machined from Aircraft Grade Aluminum
  • Rich tone, brighter than brass with excellent note separation
  • Mounting holes are tapped extra deep for added stability
  • Extra-long stainless steel screws provided with your block
  • Bottom face polished to a mirror finish - show it off by removing your back plate
  • Manufactured with KGC's proprietary "Flop Stop"

THIS BLOCK FITS:

Fender® Mexican Standard Series Strat®
American Special Strat®
MIM Classic Player
Classic Vibe 50's/60's
Highway 1 (2006-current)
MIM Strat®
Most Import Strats® with 6 screw pivot mounting and 2-1/16" string spacing

SPECS:
Width2.95 in (74.9mm)
Height1.65 in (42mm)
Thickness0.50 in (12.7mm)
Weight3.5 ounces

Regular Price: $89.95
Garage Sale Price: $75.00
You Save: 17%

1 available

Quantity: