Bridge Parts for Stratocaster®
Callaham "CG" Saddles for Vintage Stratocaster®
Set includes 6 stamped steel "CG" saddles with stainless screws, springs, and height adjustment screws, and allen wrench. 2-7/32 string spacing. Nickel finish.
$37.00
Callaham Vintage Style Saddles for Mexican Standard
Premium quality nickel-plated steel saddles for 2-1/16 Mexican Standard guitars. Combine these saddles with a Callaham Heavy Steel Tremolo Block to give your Mexi Strat outstanding tone.
Includes stainless screws, springs, and height adjustment screws, and allen wrench.
$40.00
Callaham Vintage Styled "CG" Saddles for American Standard Bridge
High quality vintage-styled saddle for American Standard guitars. Not only do they sound far better than the stock cast saddles, they also look nicer. These saddles are specifically for American Standard styled bridges with the offset intonation screw. These saddles will work on either Strats® or Teles® with this style bridge. They are supplied with all stainless steel 4-40 screws. Height screw length is 5/16" except for the E string which is The E string 1/4".
Allen wrench included. Available in nickel. 2-1/16" string spacing.
$40.00
Currently out of stock
Fender® Vintage Stratocaster® Bridge Saddles, Nickel
Complete set of vintage-style, nickel-plated stamped steel Stratocaster® bridge saddles, complete with all screws, springs and Allen wrench.
$34.80
Vintage Style Strat® Saddles
Nickel-plated steel bridge saddles
Includes height adjustment screws,
intonation screws and springs.
$25.80
Callaham Vintage Stainless Steel Saddle Screw Kit for Strat®
This is a great upgrade kit or restoration kit for any U.S. made vintage Strat saddle. All stainless steel.
$8.00
Includes:
- (4) 5/16 and (8) 3/8 #4-40 height adj. screws
- 6 intonation screws
- 6 springs
Callaham Stainless Steel "64" Traditional Tremolo Arm With Tip
This arm is about an inch shorter than a standard trem arm and sits closer to the face of the guitar. The stainless steel looks great and is much stronger than the carbon steel arms. This is the best arm available today for vintage or modern tremolo bridges. It has standard 10-32 UNF threads and measures 5¼ inches from end of tip to center of bend.
Choose from parchment white or mint green tip.
$15.00
Bridge Parts for Telecaster®
Callaham Compensated Bridge Saddles for Tele®, Brass
High polished brass saddles are slanted for correct
intonation. These saddles offer maximum room for the string
to go across the saddle without coming in contact with the
height adjustment screw hole. Milled bottom. Allen wrench included.
$38.00
Currently out of stock
Callaham Compensated Bridge Saddles for Tele®, Stainless Steel
These saddles offer the same superior quality as our
Callaham brass saddles, but in 416 stainless steel for a
brighter tone. Milled bottom. Allen wrench included.
$45.00
Callaham Enhanced Vintage Compensated Bridge Saddles for Tele®, Brass
Machined from billet stock, these Callaham Enhanced Vintage saddles maintain the vintage look while eliminating the problem of the string moving on the saddle and altering string spacing. Just like Callaham's original saddles these enhanced bridge saddles will give perfect intonation.
All Callaham saddles are hand polished and buffed to insure they are free of burrs that can cut strings.
Allen wrench included.
$37.00
Callaham Enhanced Vintage Compensated Bridge Saddles for Tele®, Stainless Steel
Machined from billet stock, the Callaham Enhanced Vintage saddles maintain the vintage look while eliminating the problem of the string moving on the saddle and altering string spacing. These stainless steel saddles are recommended for players using string benders. Just like the original Callaham saddles, these saddles give you perfect intonation.
All Callaham saddles are hand polished and buffed to insure they are free of burrs that can cut strings.
Allen wrench included.
$45.00
Rutters Broadcaster® Steel Saddles Straight Comp
Nickel-plated cold rolled steel, machined to original Broadcaster® specifications. Individual, discreet grooves provide for correct intonation and eliminate "string wandering" while maintaining the vintage straight look.
Nickel-plated steel slotted set screws with the correct angle.
Made in USA.
$55.00
Rutters Broadcaster® Steel Saddles Non-Compensated
Nickel-plated cold rolled steel, machined to original Broadcaster® specifications. Non-compensated for vintage look and vintage-style intonation. Nickel-plated steel slotted set screws with the correct angle.
Made in USA.
$55.00
Fender® Vintage Style Telecaster® Bridge Plate
Genuine Fender 3 saddle vintage style bridge plate
$15.00
Fender Telecaster Bridge Plate Mounting Screws (Set of 4)
Genuine Fender Telecaster bridge plate mounting screws. Nickel plated. Set of 4.
$5.95
Callaham Compensated Bridge Saddles for Tele®, Brass
High polished brass saddles are slanted for correct
intonation. These saddles offer maximum room for the string
to go across the saddle without coming in contact with the
height adjustment screw hole. Milled bottom. Allen wrench included.
$38.00
Currently out of stock
Callaham Compensated Bridge Saddles for Tele®, Stainless Steel
These saddles offer the same superior quality as our
Callaham brass saddles, but in 416 stainless steel for a
brighter tone. Milled bottom. Allen wrench included.
$45.00
Callaham Enhanced Vintage Compensated Bridge Saddles for Tele®, Brass
Machined from billet stock, these Callaham Enhanced Vintage saddles maintain the vintage look while eliminating the problem of the string moving on the saddle and altering string spacing. Just like Callaham's original saddles these enhanced bridge saddles will give perfect intonation.
All Callaham saddles are hand polished and buffed to insure they are free of burrs that can cut strings.
Allen wrench included.
$37.00
Callaham Enhanced Vintage Compensated Bridge Saddles for Tele®, Stainless Steel
Machined from billet stock, the Callaham Enhanced Vintage saddles maintain the vintage look while eliminating the problem of the string moving on the saddle and altering string spacing. These stainless steel saddles are recommended for players using string benders. Just like the original Callaham saddles, these saddles give you perfect intonation.
All Callaham saddles are hand polished and buffed to insure they are free of burrs that can cut strings.
Allen wrench included.
$45.00
Rutters Broadcaster® Steel Saddles Straight Comp
Nickel-plated cold rolled steel, machined to original Broadcaster® specifications. Individual, discreet grooves provide for correct intonation and eliminate "string wandering" while maintaining the vintage straight look.
Nickel-plated steel slotted set screws with the correct angle.
Made in USA.
$55.00
Rutters Broadcaster® Steel Saddles Non-Compensated
Nickel-plated cold rolled steel, machined to original Broadcaster® specifications. Non-compensated for vintage look and vintage-style intonation. Nickel-plated steel slotted set screws with the correct angle.
Made in USA.
$55.00
Fender® Vintage Style Telecaster® Bridge Plate
Genuine Fender 3 saddle vintage style bridge plate
$15.00
Fender Telecaster Bridge Plate Mounting Screws (Set of 4)
Genuine Fender Telecaster bridge plate mounting screws. Nickel plated. Set of 4.
$5.95
