Electronics Upgrade Kits for Stratocaster®

Our Stratocaster® wiring upgrade kits feature many variations to help you nail the tone you are looking for. CTS audio taper pots are used throughout, along with OakGrigsby and CRL switches. Cornell Dubilier, Orange Drop and Mallory 150 caps are offered for the tone controls (in specified kits). These kits include vintage style, cloth insulated wire, and Switchcraft ¼" output jacks.

Each kit has 3 variations:

Vintage: This kit has traditional component values. It is best for 50's style, vintage output pickups.

Vintage-Modern / SRV: This kit has component values that suit hotter, vintage style pickups for blues, etc. This kit is recommended over the Vintage kit for players other than those seeking exact mid 50's spec parts.

Modern: This kit has component values that suit many modern pickups. Same values as stock components in most current Fender® Stratocasters®.

Premium Electronics Upgrade Kit for Stratocaster

$50.40


Kit includes:
  • 3 CTS 250K Split Shaft Audio Taper Potentiometers
  • 1 OakGrigsby 5 Way Switch
  • 1 Cornell Dubilier WMF Capacitor
  • 1 Ceramic Disk or Mallory Metalized Polyester Capacitor (for treble bleed - optional)
  • ¼" Switchcraft Output Jack
  • 2' each Black & White Vintage Style Cloth Covered Wire
  • Wiring Diagram 

Kit Style:
Vintage
Vintage-Modern / SRV
Modern

Treble Bleed Capacitor Type:
Ceramic Disk
Mallory 150

Quantity:  

Deluxe Electronics Upgrade Kit for Stratocaster

$36.00


Kit includes:
  • 3 CTS 250K Split Shaft Audio Taper Potentiometers
  • 1 CRL 5 Way Switch
  • 1 Orange Drop Type 715P Polypropylene Film Capacitor- or - Mallory Series 150 Metalized Polyester
  • ¼" Switchcraft Output Jack
  • 2' each Black & White Vintage Style Cloth Covered Wire
  • Wiring Diagram 

Kit Style:
Vintage
Vintage-Modern / SRV
Modern

Capacitor Type:
Orange Drop Type 715P
Mallory Series 150

Quantity:  

Old Style Spaghetti Insulation, 6 Inch Piece

$1.00


White fiberglass sleeving is varnished and closely resembles early style spaghetti. 20 AWG for insulating component leads.

Quantity:  

Soldering Heat Sink

$3.75


Clip to component lead while soldering to avoid heat damage to the component.

Quantity: