TonePros Locking Hardware
TonePros locking bridges and tailpieces feature Allen locking screws for a "patented pinch" that eliminates leaning and looseness, resulting in solid coupling of the strings, hardware and guitar for better string energy transfer, enhanced sustain and better tone. Your bridge setup stays in tune because tilting and looseness are eliminated. Hardware won’t fall off when restringing. TonePros locking hardware requires no modification to your guitar.
TonePros Standard Tune-O-Matic Locking Bridge, TP6
Small post, American thread bridge locks securely to posts. Will fit your American made guitar. Includes thumbwheels, posts and Allen wrench.
TonePros Standard Tune-O-Matic Locking Bridge, Notched Saddles, T3BP
Small post, American thread bridge with pre-notched saddles locks securely to posts. Will fit your American made guitar. Includes thumbwheels, posts and Allen wrench.
TonePros Tune-o-Matic Locking Bridge, Notched Saddles, Metric, T3BT
Large post, Metric bridge with pre-notched saddles locks securely to posts. Will fit import guitars such as Epiphone. Includes thumbwheels, posts and Allen wrench.
TonePros Tune-O-Matic Locking Bridge, AVR2
ABR1 replacement bridge offers vintage styling with modern locking performance. Small post American thread bridge locks securely to posts. Will fit your American made vintage spec guitar. Includes thumbwheels, posts and Allen wrench.
Callaham CNC Billet Steel ABR-1 Bridge with Vintage Studs, Slotted Saddles
This bridge is a direct replacement on Gibson guitars with ABR-1 bridges. The body of the Callaham CNC Billet Steel ABR-1 Bridge is machined from cold rolled alloy steel and is the only bridge of its type on the market. Unlike Gibson and other aftermarket bridges, which are cast from zinc alloy, brass or aluminum, causing heavy dampening to overtones, the Callaham CNC Billet Steel ABR-1 Bridge offers increased sustain and full tone without fuzzy bass or sharp high end notes.
$145.50
Currently Out of Stock
Callaham CNC Billet Steel ABR-1 Bridge with Nashville Conversion Studs, Slotted Saddles
This ABR-1 bridge includes Nashville conversion studs, making it a direct replacement for Gibson guitars equipped with a Nashville Tune-O-Matic bridge. The body of the Callaham CNC Billet Steel ABR-1 Bridge is machined from cold rolled alloy steel and is the only alloy steel bridge available. Unlike Gibson and other aftermarket bridges, which are cast from zinc alloy, brass or aluminum, causing heavy dampening to overtones, the Callaham CNC Billet Steel ABR-1 Bridge offers increased sustain and full tone without sharp high end notes.
$150.50
Currently Out of Stock
Callaham CNC Billet Steel ABR-1 Bridge with Vintage Studs, Slotted Saddles, Gold Plated
This gold-plated bridge is a direct replacement on Gibson guitars with ABR-1 bridges. The body of the Callaham CNC Billet Steel ABR-1 Bridge is machined from cold rolled alloy steel and is the only bridge of its type on the market. Unlike Gibson and other aftermarket bridges, which are cast from zinc alloy, brass or aluminum, causing heavy dampening to overtones, the Callaham CNC Billet Steel ABR-1 Bridge offers increased sustain and full tone without fuzzy bass or sharp high end notes.
$195.00
Callaham CNC Billet Steel ABR-1 Bridge with Nashville Conversion Studs, Slotted Saddles, Gold Plated
This gold-plated ABR-1 bridge includes Nashville conversion studs, making it a direct replacement for Gibson guitars equipped with a Nashville Tune-O-Matic bridge. The body of the Callaham CNC Billet Steel ABR-1 Bridge is machined from cold rolled alloy steel and is the only alloy steel bridge available. Unlike Gibson and other aftermarket bridges, which are cast from zinc alloy, brass or aluminum, causing heavy dampening to overtones, the Callaham CNC Billet Steel ABR-1 Bridge offers increased sustain and full tone without sharp high end notes.
$201.00
TonePros Locking Tailpiece, T1ZS
TonePros standard stop tailpiece locks securely to posts. American 5/16-24 threads. 3¼" post spacing. Includes posts, inserts and Allen wrench.
TonePros Wraparound Bridge/Tailpiece, AVT2G
A fully adjustible replacement wraparound bridge/tailpiece with low profile that is "de-horned" to be gentle to your picking hand. Replaces older, non-adjustable, wrap-a-round bridge/tailpiece as used on modern and older guitars including: Les Pauls, Melody Makers, Les Paul Juniors and Specials. Nickel plated. Includes TonePros locking posts, inserts and Allen wrench.
$123.20
TonePros Vintage Wraparound Bridge/Tailpiece, VTPN-1A
An aluminum replacement wraparound bridge/tailpiece. Fits modern and older guitars including: Les Pauls, Melody Makers, Les Paul Juniors and Specials. Nickel plated aluminum.
$105.05
Compensated Wraparound Bridge/Tailpiece for Melody Maker & Les Paul Junior
For Melody Maker & Les Paul Jr, etc. Chrome plated, adjustable for intonation. Includes posts and threaded inserts.
$23.40
Gibson Style Stop Tailpiece
Traditional height adjustable stop tailpiece with American 5/16-24 threads. 3¼" post spacing. Includes posts and inserts.
TonePros Locking Posts
For use with stop tailpieces, wraparound-style bridge/tailpieces or vintage-style non-adjustable bridge/tailpieces. Use your existing stop tailpiece or the stop tailpiece of your choice, including those shown above. American thread 5/16-24. Set of 2, with bushings, inserts and locking wrench.
Callaham Vintage S-Model Strat® Bridge Assembly
The finest nickel vintage style bridge available today.
- Callaham enhanced vintage block
- Choice of 64, Gilmour or Fender-length virtual pop-in stainless steel tremolo arm with mint green or parchment white tip (left hand only available with 64 arm)
- Vintage styled top plate
- Expert plating
- 6 Callaham stamped steel "CG" saddles with springs
- Stainless steel intonation and height adjustment screws
- 6 Callaham hardened steel bridge plate mounting screws
- 5 springs, claw with 2 stainless steel screws
- allen wrench
- 2-7/32 string spacing
Fender® Vintage Style Stratocaster® Bridge Assembly, Gold-Plated
Complete vintage style Stratocaster bridge assembly.
Includes:
- Saddles
- Bridge plate
- Trem arm with white tip
- Claw, springs and all mounting screws
$135.00
Callaham Vintage Bridge Assembly for Telecaster®, Enhanced Saddles
Available in right hand only. Bridge includes:
- Callaham steel bridge plate in low luster nickel finish
- 3 Callaham Vintage Enhanced Brass Compensated Saddles
- All stainless steel screws and springs throughout assembly (Phillips screws except height adjustment)
- allen wrench
$115.00
Callaham American Standard Bridge Assembly for Telecaster®, Enhanced Saddles
This is a direct replacement for American Standard (American Series) guitars for those players wanting a vintage 3 saddle bridge sound. The bridge plate has a lower, cleaner profile than the stock plate allowing for better muting. The steel plate will dramatically increase sustain, volume, response time and string balance of an American Standard guitar compared to the stock brass plate. String holes have a full radius edge like the stock plate. The change is as significant as changing your pickups. Please remember that American Standard and Vintage plates are not interchangeable.
Bridge includes:
- 3 Callaham Vintage Enhanced Brass Compensated Saddles
- Stainless steel phillips intonation, height, phillips top plate screws, and springs
- Callaham cold rolled steel nickel plated bridge plate
- allen wrench
- Satin finish
$115.00
Callaham CNC Billet Steel ABR-1 Bridge with Vintage Studs
This bridge is a direct replacement on Gibson guitars with ABR-1 bridges. The body of the Callaham CNC Billet Steel ABR-1 Bridge is machined from cold rolled alloy steel and is the only bridge of its type on the market. Unlike Gibson and other aftermarket bridges, which are cast from zinc alloy, brass or aluminum, causing heavy dampening to overtones, the Callaham CNC Billet Steel ABR-1 Bridge offers increased sustain and full tone without fuzzy bass or sharp high end notes.
$125.50
