Rutters Shallow Twisted Machined Jack Cup
Early 50s look but shallower so a right angle plug can be used. Knurling cut on a spiral so it twists in place and stays there. Chrome-plated steel.
Made in USA.
$30.00
Fender® Style Strap Buttons (Set of 2)
Includes mounting screws. Felt washers sold separately.
Gibson Strap Buttons, (Set of 2)
Includes mounting screws. Felt washers sold separately.
Schaller Style Strap Locks (Set of 2)
Callaham Stainless Steel Neck Plate
Premium high luster stainless steel neck plate with serial number.
$25.00
Nickel Neck Plate Screws (Set of 4)
Nickel plated neck plate screws, excellent for Callaham neck plate. Set of 4, available in Phillips or slot head.
$5.25
Rutters Single Slot Truss Nut
Machined to correct vintage specs, nickel-plated steel. 10-32 thread.
Made in USA.
$10.00
String Ferrules, No Lip (Set of 6)
Vintage style, no lip ferrules for flush fit installation. Mounting hole diameter is 3/8".
String Ferrules with Lip, Ridged (Set of 6)
Nickel plated string ferrules with 25/64" diameter flange. Mounting hole diameter is 5/16".
$7.75
String Ferrules with Lip, Smooth (Set of 6)
Nickel plated string ferrules with 9.3mm diameter flange. Mounting hole diameter is 5/16 inch.
$7.75
Fender® Vintage Style String Tree
Genuine Fender® vintage style string tree. Includes screw and spacer.
$4.85
Tapered Reamer, 1/8" to 1/2"
The correct hand tool for safely enlarging peg head and other holes. Alternate use between front and back of hole, stopping to check your work often to avoid making holes too large.
$9.60
#36 Drill Bit
Correct sized bit for drilling holes for the stabilizer pins of Sperzel Trim Lock Locking Tuners and Sound Lock Tuners. We recommend that you measure the depth of your required hole carefully and mark this measurement on your drill bit with several wraps of masking tape to avoid drilling through your work.
$2.50



























