Seymour Duncan Effect Pedals
Tweak Fuzz Pedal
The Seymour Duncan Tweak Fuzz™ is a most unique fuzz pedal that incorporates a six position “Tweak” switch to voice your fuzz tone the way you want it. The basic tone will be familiar to players who remember the rich, lush, vintage fuzz tones used at the big ‘60s pop festivals. But with the addition of the Tweak switch, you can create a myriad of totally unique fuzz tones making this one of the most versatile pedals for electric guitar and bass.
$99.99
| Feature | Benefit |
|---|---|
| Tweak Control: | Engages one of six pre-set EQ resonances that give an overall “flavor” to the Tweak Fuzz, rolling off the bottom end and influencing the behavior of the Gain control. Each of the six frequencies was chosen and voiced to enhance rich harmonics and bring out the most flattering qualities of your guitar or bass. |
| Gain Control: | Controls the amount of square wave clipping distortion. It can go from mildly distorted to all-out fuzz fury. |
| Volume Control: | Sets the overall volume to the optimum level. Whether you want to set it to match the bypassed signal or whether you want a big boost when you engage your Tweak Fuzz: it’s your decision. |
| True Bypass: | Removes the circuit from your guitar’s signal chain, allowing your guitar’s signal to pass through the Tweak Fuzz without affecting your tone or gain. |
| Power Source: | Standard 9-volt battery or regulated 9V DC power supply. |
| Versatile: | The Tweak feature allows you to voice the box to your tone preference. Works with guitar or bass. It works especially well with non-master volume amps. |
| Durable: | Heavy-duty 1.6 mm steel sheet metal means this unit is built to be stomped. |
| Specifications | |
|---|---|
| Current consumption: | 2 milliamps |
| Gain range: | 23dB to +50dB |
| Dimensions: | 4.62” wide x 5.10” deep x 2.2” tall |
| Type of circuitry: | Discrete, Class A, low-noise transistor |
| Power: | DC 9 V battery, or regulated 9-12 V DC adapter |
SFX-01 Pickup Booster Pedal
The first effects pedal designed specifically to work together with the pickups in your instrument to achieve optimum gain and resonance for all your tonal applications. Turn the knob to dial in pure, flat-EQ gain, ranging from 6dB, all the way to an astonishing 25dB! In addition, the Pickup Booster can add thickness to a single coil pickup. By engaging the Resonance Switch, the resonant peak of a single coil pickup can be lowered, making a Strat® pickup sound similar to a vintage humbucker or even a high-output humbucker.
$75.95
| Specifications | |
|---|---|
| Gain range: | 6 to 25 dB |
| Pickup Resonance Switch: | Makes a single coil sound like a vintage humbucker ("1") or high output humbucker ("2"). |
| "1" - Resonance shift down 2-3kHz | |
| "0" - Resonance is not affected | |
| "2" - Resonance shifts down 3-5kHz | |
| Bypass: | True bypass |
| Noise: | -120 dBV (referred to input with gain set at 25dB) |
| Type of circuitry: | Fully discrete, class A |
| Distortion: | < 0.1% |
| Power: | DC 9-12 V battery, or regulated DC adapter |
| Current consumption: | 3.5mA @ 9V (when LED is "on"), 1.5mA @ 9V (when LED is "off") |
| Input impedance: | 500K (when effect is "on"), Open (when effect is "off") |
| Output impedance: | 5K ohms |
| Dimensions: | 2.5" x 5" x 2" (W x L x H) (6.35cm x 12.7cm x 5.08 cm) |
| Weight: | 0.8 lb. Without battery, 0.9 lb. With battery |
| Chassis material: | Heavy duty 1.6 mm steel |
Seymour Duncan Twin Tube Classic™ Preamp Pedal
The high-plate voltage and 100% vacuum tube signal path allows the tubes to operate at their fullest potential and provide maximum dynamic range. The means you get the most gain and all the smooth tone you expect from a high-quality tube preamp. Two channels provide versatility. True bypass. Fully encapsulated toroidal transformer for quiet operation. Heavy duty steel chassis.
Seymour Duncan SFX-03 Twin Tube Classic Preamp Pedal Features:
- Uses two premium, military-spec, subminiature, USA-made Philips-Sylvania 6021 dual-triode tubes
- High-plate voltage
- 100% vaccum tube signal path
- Two channels
- True bypass
- Fully encapsulated toroidal transformer for quiet operation
- Heavy-duty steel chassis
$209.30
| Specifications | |
|---|---|
| External dimensions: | 7.50 X 6.62 X 1.96 in. (190 X 168 X 50 mm) |
| Weight: | 3.15 lbs (1.43KG) |
| Gain: Gain measured at 500Hz |
Before level compensation Rhythm channel – 74dB Lead channel – 98dB After level compensation Rhythm channel – 52dB Lead channel – 76dB |
| Nominal output level: Nominal output level measured with 100mV 500Hz input signal and all controls set to 12 o’clock. |
Rhythm channel – 0.4 Vrms (-5dBu) Lead channel – 0.5 Vrms (-4dBu) |
| Max. output level before clipping: Max. output measured with all controls set fully up. |
2 Vrms (+8dBu) |
| THD @ 1 Volt RMS output: | 3% |
| Harmonic spectrum @ 1Vo: | predominantly 2nd harmonic with minor amounts of 3rd harmonic @ > 20dB below |
| Noise @ output: Noise measured with all controls set fully up and input shorted. |
Rhythm channel - < 1mV (< 3 dB hum content) Lead channel - < 8mV (< 3 dB hum content) |
| Power consumption: | 10.4 W |
Seymour Duncan SFX-05 Lava Box
Mosfet distortion/overdrive with incredible dynamic range. Even at the highest gain settings, you can turn down your guitar's volume control and the Lava Box will clean up beautifully. Onstage, you can set the Lava Box for a loud lead tone and simply use your guitar's volume control to get your clean and crunch tones--all without switching channels or kicking in other effects. In the studio, you can explore the huge array of tones that are available with the intuitive controls, creating special-effect thin tones or spooky dark sounds that are perfect for layering and overdubs.
The six-position "Rumble" bass roll-off control changes the sonic character of the Lava Box's distortion for a huge range of tones, from bright and spanky to deep and warm. Whether you have the thinnest single-coil in the bridge of your guitar or the woolliest humbucker in the neck, there is a Rumble setting that's perfect for it.
$99.95
| Specifications | |
|---|---|
| Gain Range: | 33dB – 57dB |
| Type of Circuitry: | 2 Stage Mosfet Input with CMOS Class A Output |
| Power: | DC 9 – 12V Battery or Regulated DC Adapter |
| Current Consumption: | 4.0 mA Max |
| Dimensions: | 4.62" Wide X 5.10" Deep X 2.20" Tall |
| Weight: | 1.6 Lbs |
| Chassis Material: | 1.6mm Steel |
| "Rumble" Control Low Frequency Roll-offs: | 620Hz; 530Hz; 330Hz; 300Hz; 210Hz; 160Hz |
