|
|
|
Pre-CBS American Vintage Tremolo Block, Right Hand (new enhanced version)
Models that this block fits without modification include: Pre-CBS, American Reissues, Jimmy Vaughan, Highway 1 (up to and including year 2005), Custom Shop Relics, Mexi Deluxe & MIM Classic 50's, 60's & 70's. Requires 10-32 American thread trem arm.
$60.00
|
|
|
|
|
|
|
Pre-CBS Vintage Style Tremolo Block, Left Hand (new enhanced version)
Models that this block fits without modification include: Pre-CBS, American Reissues, Jimmy Vaughan, Highway 1 (up to and including year 2005, Custom Shop Relics, Mexi Deluxe & MIM Classic 50's, 60's & 70's. Requires 10-32 American thread trem arm.
$65.00
|
|
|
|
|
|
|
Mexican Standard Tremolo Block (new enhanced version)
This trem block fits Mexican Standard and Highway 1 (2006 and earlier) without modification. Requires 10-32 American thread trem arm.
$60.00
|
|
|
|
|
|
|
American Standard Tremolo Block (new enhanced version)
This trem block fits American Standard without modification. This model does not fit American Deluxe. Requires 10-32 American thread trem arm
$60.00
|
|
|
|
|
|
|
American Deluxe Tremolo Block (new enhanced version)
This trem block fits American Deluxe without modification. Requires 10-32 American thread trem arm.
$68.00
|
|
|
|
|
|
Callaham Stainless Steel "64" Virtual Pop-In Tremolo Arm with Tip
This arm comes standard with our Callaham Vintage S Model Bridge Assembly and is recommended for use with Callaham enhanced blocks. When used with Callaham enhanced blocks, it is near unbreakable. It is the same bend as the Callaham traditional "64" arm. It is only for use with Callaham enhanced tremolo blocks. Choose from parchment white or mint green tip.
$15.00
|
|
|
|
|
|
Callaham Stainless Steel "64" Traditional Tremolo Arm With Tip
This arm is about an inch shorter than a standard trem arm and sits closer to the face of the guitar. The stainless steel looks great and is much stronger than the carbon steel arms. This is the best arm available today for vintage or modern tremolo bridges. It has standard 10-32 UNF threads.
Choose from parchment white or mint green tip.
$15.00
|
|
|
|
|
|
Callaham Vintage Bridge Assembly for Stratocaster®
The finest nickel vintage style bridge available today.
- Callaham enhanced vintage block
- Virtual pop-in stainless steel tremolo arm with mint green or parchment white tip
- Vintage styled top plate
- Expert plating
- 6 Callaham stamped steel "CG" saddles with springs
- Stainless steel intonation and height adjustment screws
- 6 Callaham hardened steel bridge plate mounting screws
- 5 springs, claw with 2 stainless steel screws
- allen wrench
- 2-7/32 string spacing
|
|
|
|
|
|
Callaham "CG" Bridge Saddles for Vintage Stratocaster®
Set includes 6 stamped steel "CG" saddles with stainless screws, springs, and height adjustment screws, and allen wrench. 2 7/32 string spacing. Nickel finish.
$33.00
|
|
|
|
|
|
Callaham Vintage Style Saddles for Mexican Standard
Premium quality nickel-plated steel saddles for 2 1/16 Mexican Standard guitars. Combine these saddles with a Callaham Heavy Steel Tremolo Block to give your Mexi Strat outstanding tone.
Includes stainless screws, springs, and height adjustment screws, and allen wrench.
$40.00
|
|
|
|
|
|
Callaham Vintage Styled "CG" Saddles for American Standard Bridge
High quality vintage-styled saddle for American Standard guitars. Not only do they sound far better than the stock cast saddles, they also look nicer. These saddles are specifically for American Standard styled bridges with the offset intonation screw. These saddles will work on either Strats® or Teles® with this style bridge. They are supplied with all stainless steel 4-40 screws. Height screw length is 5/16" except for the E string which is The E string 1/4".
Allen wrench included. Available in nickel. 2-1/16" string spacing.
$40.00
|
|
|
|
|
|
Callaham Vintage Stainless Steel Saddle Screw Kit for Strat®
This is a great upgrade kit or restoration kit for any U.S. made vintage Strat saddle. All stainless steel.
Includes:
- (4) 5/16 and (8) 3/8 #4-40 height adj. screws
- 6 intonation screws
- 6 springs
$6.00
|
|
|
|
|
|
Callaham Vintage Bridge Assembly for Telecaster®
Bridge includes:- Callaham steel bridge plate in low luster nickel finish
- 3 Callaham Brass Compensated Saddles
- All stainless steel screws and springs throughout assembly (Phillips screws except height adjustment)
- allen wrench
|
|
|
|
|
|
Callaham Compensated Bridge Saddles for Tele®, Brass
High polished brass saddles are slanted for correct
intonation. These saddles offer maximum room for the string
to go across the saddle without coming in contact with the
height adjustment screw hole. Milled bottom.
Allen wrench included.
$37.00
|
|
|
|
|
|
Callaham Compensated Bridge Saddles for Tele®, Stainless Steel
These saddles offer the same superior quality as our
Callaham brass saddles, but in 416 stainless steel for a
brighter tone. Milled bottom.
Allen wrench included.
$45.00
|
|
|
|
|
|
Callaham Bridge Plate Mounting Screws (Set of 6)
Just like the original screws used in the Pre-CBS guitars.
1 1/4 inches long and made from hardened steel, these screws
increase sustain and clarity. Please note that they will only
work with 6-pivot vintage style bridges. Sold in set of 6.
$5.00
|
|
|
|
|
|
Callaham Stainless Steel Neck Plate
Premium high luster stainless steel neck plate with serial number.
$17.00
|
|
|
|
|
|
Callaham Early 50's Broadcaster Dome Knobs
Heavy knurl knob patterned after early Broadcaster knobs.
Drilled for 1/4 solid shaft pots.
Nickel plated, set of 2.
$38.00
|
|
|
|
|
|
Callaham Late 50's Flat Top Heavy Knurled Knobs
This knob is made after a '57 knob with the recessed flat
top. Drilled for 1/4 solid shaft pots.
Nickel plated, set of 2.
$38.00
|
|
|
|
|
|
Callaham Base Plate for Strat®
The Strat® Player's Secret Weapon!
Often installed on "boutique" pickups, these base plates will improve any Strat® style pickup by increasing output by 10%. Easily installed, these base plates will boost your pickup's midrange and bass response by increasing the pickup's magnetic flux. Includes installation instructions.
$10.00
|
|
|
|
|
|
Callaham Blender Pot
Cryogenically treated pot allows you to blend the neck and bridge pickups together. With the blender, your guitar will have a volume, a master tone, then the blender. With the blender turned to 10, the guitar has a normal Strat® switch set-up. With the blender set to 0, the neck and bridge pickups are connected in switch positions 1 and 5. All three pickups are connected in positions 2 and 4, while position 3 is still just the middle pickup, giving you 2 extra sounds. This is a true no load pot. Wiring diagram included.
$10.00
|
|
|
Related Item(s):
